Contact the Broker

Hello, I would like more information on 30' 1986 Catalina 30 ***SOLD***.

Red fields are required

LOCATION: KELOWNA, BC

Jabula, meaning "be happy" in Zulu is a must see to be truly appreciated for her condition. She has been meticulously maintained and has undergone an extensive refit by the current owner. She is in METICULOUS condition for her age and will serve you well for many years to come.

Current owner purchased the boat in 2010 at which time Jabula was moved to the Okanagan and the extensive refit was initiated and for two years remained on the hard for refit work. The refit work has continued to the present. The refit was undertaken by the present owner with professional work being carried out where necessary. All work was undertaken to be as far as possible compliant with ABYC Standards. The refit was an extensive project which involved refitting almost every area and system of the boat. Since 2010, the refit has absorbed much time and during this time the boat has been little and lightly used. An engine hour meter was installed at the time of purchase and only 84 hours have been logged since that time.

The extensive inventory will reflect that the boat is being sold equipped “ready to sail away”. Book your private showing today, she is a must see!

INVENTORY DETAILS

The following is an inventory of features of Jabula. The term “Refit” indicates these items were installed as part of the refit. The refit was initiated in 2010 and involved most areas and systems. Consequently, the inventory has been arranged as logically as possible by areas and systems.

Dimensions:
LOA: 30'
Beam: 10'10"
Draft: 5'3"
Weight: 10,200 lbs

Tankage:
Fuel: 18g
Fresh Water tank under V-berth: 25g
Fresh water tank Starboard: 18g
Holding: 18g

Engine:
Make: Universal M25
Type:Inboard
Fuel Type: Diesel
Drive: Direct Drive
HP: 21 hp

Anchorage:
Refit: custom stainless drain plate for anchor locker
Refit: anchor locker hasp
Refit: galvanized Rocna Vulcan anchor
Refit: 200 ft of anchor three strand anchor line with 30 Feet of 5/16 inch chain
Refit: Mantus marine bridle snubbing system
Refit: New roller fitted in anchor roller (Catalina Direct)
Refit: 25’ of line with Hook and Go system (to put line on mooring buoy). Includes boat hook with fitting to carry Hook and Go shackle on line.

Audio
Refit: Fusion RA-200 marine stereo
Refit: Fusion Marine Bluetooth MS-BT100 Module
Refit: Bose speakers in cabin
Refit: Polyplanar waterproof speakers mounted in Tortuga top.

Bilge
Refit: bilge pump
Refit: bilge alarm
Refit: hand pumped bilge pump

Cabin
Refit: Cushions professionally reupholstered in Sunbrella fabric
Refit: All counters professionally resurfaced with white Formica
Refit: Woodwork refinished
Refit: fittings and stainless steel folding leg
Refit: Throw cushions
Refit: Custom glass divider with boat name etched into the glass between galley sink and seating
Refit: Sunbrella curtains to separate cabin from head and head from V-berth
Refit: All six cabin windows covered by OceanAir roller shades
Refit: Teak Step for V-berth
Refit: Curtain rails and curtains to separate cabin from head area and head area from V-berth
Refit: Fire extinguisher in cabin
Refit: Refinished engine and lockers lids
Xintex Marine carbon monoxide alarm- (Model CO Sentinel - wired model)
Refit: Wireless carbon monoxide alarms (x2)
Mats for cockpit: Companionway  and outside head
Refit: Custom Corian headboard with new ladder sittings for attaching companionway steps

Canvas - All canvas on the boat was added in the refit process.
Refit: Bimini (Shoreline Canvas, Kelowna)
Refit: Companionway cover (Shoreline Canvas, Kelowna)
Refit: connector canvas between the Bimini and Tortuga hard top (Shoreline Canvas, Kelowna)
Refit: cockpit cubbyhole covers (Shoreline Canvas, Kelowna)
Refit: cockpit instrument panel cover (Shoreline Canvas, Kelowna)
Refit: covers over teak boards keeping sliding cabin roof (Shoreline Canvas, Kelowna)
Refit: Sunscreen covering aft of Bimini to pushpit level (Shoreline Canvas, Kelowna)
Refit: Ensign Flag staff cover
Refit: Main sail cover (North Sails)
Refit: Binnacle cover (Shoreline Canvas, Kelowna)
Refit Boat winter cover (Shoreline Canvas, Kelowna)
Refit: Handrail covers on deck (Catalina Direct)
Refit: Solar panel covers - Sunbrella

Cockpit and Aft
Refit: Lockers painted on inside on starboard and aft
Refit: Locker Stainless steel hinges replaced on starboard and port lockers
Refit: Locker lids refinished
Refit: Zarcor HDPE cockpit table
Refit: two Zarcor HDPE drink holders
Refit: Zarcor HDPE drink and accessory holder for mounting on binnacle
Refit: custom made HDPE pushpit seats
Custom Shelf attached to pushpit for BBQ
Refit: stainless steel Flagpole for ensign
Refit: Custom made removable HDPE swim platform – is attached to swim ladder on aft
Refit: stainless steel fishing rod holder
Refit: stainless steel engine blower vent cowls – starboard and port
Refit: Finnish made flat webbing reel (200 feet of webbing)
Refit: LED cockpit light installed in Tortuga top. Light operated with Bluesea Systems dimmer
Refit: Blue Sea Systems winch handle holder
Refit: Stainless steel exhaust flap though hull assembly (Catalina Direct)
Refit: Through hull fitting for gas locker area ventilation
Refit: Stainless steel fitting and flagpole for ensign
Refit: Cockpit scupper fittings and hoses
Refit: Lewmar OneTouch winch handle single grip 8”
Refit: Lewmar OneTouch winch handle single grip 10”
Refit: Blue Sea Systems sheet bags (x2)
Refit: Mats for cockpit: summer (x2) winter 9x2)
Refit: Binnacle Compass  and cover (Ritchie )
Refit: Edson wheel nut
Refit: Emergency Tiller Head  and tiller handle (Catalina Direct)

Deck/Hull
Refit: Custom HDPE Pulpit seats
Refit: 6 inch Schaefer aluminum cleat on starboard
Refit: Cam cleat on HDPE base to lead main sheet and furler line aft for single handed sailing
Refit: 7 Spinlock Powerclutches for sheets and halyards
Refit: Spinlock deck organizers (two per side)
Refit: Garhauer mid Boom Traveler with deck mount and traveller car
Refit: Garhauer  mainsheet block system
Two Garhauer genoa blocks on starboard and port T-rails
Two spinnaker blocks on starboard and port T-rails
Winches – Two primary self tailing winches; two secondary winches on cabin top, one is self tailing
Refit: Garhauer Block to turn halyards from mast exit to deck organizers
Refit: Spinlock stanchion mounted fairleads for furling line
Refit: 8 Inch Schaefer aluminum cleat on foredeck (for mooring and cruising spinnaker snuffer control)
Refit: Schaefer stainless steel midship cleats on 1 inch rail (starboard and port)
Refit: Marinco/Nicro 3” Stainless Steel Solar Vent
Tortuga Hard Top over companionway + canvas panels with plastic windows on 3 sides.
Refit: deck level running lights fore and aft (Catalina Direct)
Refit: below waterline taken down to glass, recoated in Epiglass, Interprotect 2000 and Micron CSC
Refit: Painted Bootstripe (Polyurethane)
Refit: Hull strip, registration number and name on aft
Refit: Catalina name sign, decals and Catalina issued boat ID plate
Refit: Molded Marelon fittings used to replace all water through hulls (with Exception of Scupper through hulls)
Refit: Boat hook mounted on deck
Refit: New rub rail gray vinyl (Catalina Direct)
Refit: Stainless steel deck pipe caps for waste, diesel and two water inlets on deck (Catalina Direct)
Refit: Garhauer Standup Block on deck plate
Refit: Blue Sea Systems winch covers on all winches

Dock
Taylor Made StepSafe dock step (one step)

Electrical
Refit: LED lights were installed throughout
Refit: Catalina Direct Master Electrical Panel installed above chart table
Refit: Two custom electric distribution boards installed. Components on boards all Blue Sea Systems.
Refit: Blue Sea Systems Starting Isolation Dual Sensing Automatic Charging Relay
AGM Optima Blue Top starter and house batteries installed (Model D34M – Starter and deep cycle model)
Refit: battery wiring installed
Refit: ProMariner ProNautica 1220P 20 Amp 3 Bank Battery Charger
Refit: ProMariner Remote Battery Bank Status Monitor
Refit: ProMariner ProSafe FS Galvanic Isolator
Refit: Mastervolt Solar Charge Master
Refit: Blue Sea Systems
Refit: SmartPlug Shore Power inlet
Refit: Blue Sea Systems ELCI Unit
Refit: SmartPlug 30A Dual Configuration cordset
Refit: SmartPlug weatherproof cover for cordset
Refit: 12 V flush mount Receptacle (x2)
Refit: Dual USB charger plug
Refit: All 120V Outlets replaced with CGIs
Refit: Accessory panel with ST Blade Fuse Block
Refit: Accessory panel rocker switch for Fuel Polisher
Refit: Accessory Panel Blue Sea Systems rocker switch and DeckHand Dimmer for cockpit LED light
Refit: In-line blower engine compartment

Electronics
Refit: Raymarine i50 Tridata Display (Depth/Speed/ Water Temperature)
Refit: Raymarine i60 Display (Wind)
Refit: Through Hull Triducer (DT800)
Refit: Raymarine wind transducer
Refit: Raymarine iTC-5 Instrument Transducer Converter
Refit: Raymarine SeaTalk cabling system
Refit: Raymarine SeaTalk Backbone
Refit: Raymarine SeaTalk converter
Refit: Raymarine a67 Multi-Function Display
Refit: Custom Stainless Steel Bracket for Raymarine a67 Multi-Function Display
Refit: AirMar In-Hull adjustable Angle Transducer
Refit: Standard Horizon Explorer GPS Fixed VHF Radio
Refit: Standard Horizon RAM3 Remote Station Microphone
Original Garmin Chartplotter kept as back-up
Refit: Deck mounted Garmin Remote GPS Antenna for Garmin Chartplotter
Refit: Standard Horizon HX300 handheld VHF Radio
Raymarine Autohelm autopiliot
Shakespeare antenna/radio tester (ART-3 Model)

Engine
As far as is known the engine is the original engine. No formal record of the engine exists and the engine hours at the time of purchase of the boat in 2010 are not known. At the time of purchase an hour meter was installed. Since that time 84 hours of engine time have been logged.
At the time of purchase of the boat, Gartside Marine, Sidney, BC checked the engine, and a Refit: gearbox was fitted. The gear box is a TMC-40 (2:1) Twin Disc. A marine flexible shaft coupling was also installed. With the above and a variety of other updates were made by Gartside marine the total value of work undertaken being approximately $5000.
Refit: engine mounts - all 4 replaced
Refit: Balmar 6-Series Alternator/Regular Package (ARS-5 Multi-stage regulator
Refit: Universal diesel alternator bracket retrofit (Catalina Direct)
Refit: Coolant recovery tank kit
Refit: Westerbeke oil sump drain kit (banjo plug fitting and hose)
Refit: Brass manual oil extractor pump (White Star Products Model WS 280)
Refit: Cole Hersee solenoid installed
Refit: Custom stainless steel bracket for Solenoid
Refit: Water strainer (Catalina Direct)
Refit: All engine water hoses replaced
Refit: New water supply hoses from through hull to water strainer and to engine.
Refit: New heat exchanger (3”) – USA Made from Catalina Direct
Refit: New Thermostat
Refit: New air intake filter (Catalina Direct)
Refit: New water high temperature alarm retrofit (Catalina Direct)
Refit: New fuel injector hoses
Refit: Engine Instrument Seaward Panel  with engine harness upgrade (Catalina Direct)

Exhaust
Refit: exhaust flange (Catalina Direct)
Refit: exhaust riser with jacket (Catalina Direct)
Refit: exhaust manifold gaskets
Refit: silicone exhaust hump hose (Catalina Direct)
Refit: Aqua Lift muffler (Catalina direct)
Refit: Drain valve for muffler
Refit: exhaust hose (Catalina Direct)
Refit: through hull stainless steel exhaust flap assembly (Catalina Direct)
Refit: Xintex wired marine carbon monoxide alarm
Refit: 3 wireless carbon monoxide alarms

Fenders
Refit: Five F3 Polyform Fenders with black polyform covers. All have fender lines and fender hangers.
Refit: One round fender (with a fender line and stainless steel ring for raising the anchor)

Fuel Supply
Refit: Fuel Pump ( Facet Gold-Flo)
Refit: New fuel hoses
Refit: Parker Racor R15T Fuel filter
Refit: Onboard custom fuel polishing unit – custom stainless steel box; pressure gauge; Facet Posiflow pump, Goldrod 596 Water-Block 10 Micron cannister spin-on filter) (wired to accessory distribution board)
Refit: 3-Way valve system to switch between fuel tank and Fuel polisher
Refit: Valve to turn on fuel at fuel tank
Refit: New fuel fill hose

Galley
Refit: Stove (Eno Open Sea – Two burner/oven)
Refit: Electric Kettle
Refit: Stove Kettle (Stainless steel)
Bosch Tassimo coffee machine
Refit: Cutlery (for 6)
Refit: Pot and frying pan
Refit: Cutting board
Refit: Custom starboard cutting board cover for sink
Refit: Faucet for galley sink
Refit: Water filter with Faucet
Refit: Plastic wine glasses (6)
Refit: Wine glass rack in cabin roof (2)
Refit: Stainless steel paper roll holder
Refit: Fire extinguisher
Refit: Fire blanket 

Head
Refit: Jabsco Compact manual head
Refit: All New hoses fitted
Refit: Sliding door mirrors in Cabinet
Refit: Hand towel holder
Refit: Towel hooks
Refit: Stainless Steel toilet brush holder
Refit: Stainless steel rubbish bin on custom Plexiglass and stainless steel suspension bracket
Refit: Custom Plexiglass handwash bottle holder
Refit: Sink
Refit: Faucet with pullout handpiece
Refit: Oceanair Marine Dryroll toilet roll dispenser
Stainless steel paper roll holder

LPG
Refit: Seaward LPG locker with solenoid and 4lb tank (Westmarine)
Refit: Magma Marine Kettle Gas BBQ grill with rail bracket and cover (Westmarine)
Refit: Xintex S-2A Propane/CNG Monitor and Control (Westmarine)
Refit: MS-2 sensor (two -one at stove; one at Dickenson LPG heater) (Westmarine)
Refit: Single stage bulkhead mount LPG regulator (Westmarine)
Dickenson Propane Marine Heater for cabin. Heater sent to Dickenson for servicing.
Refit: New Gas lines. Both to stove and cabin heater as single uninterrupted runs protected in flexible corrugated plastic sheaths and PVC conduit.
Refit: AS above under Galley - Stove (Eno Open Sea – Two burner/oven)
Refit: Custom Starboard disposable propane four bottle holder

Mast/Boom/Rigging
Refit: Masthead sheaves (x)3 (Catalina Direct)
Refit: Spinnaker crane (Catalina Direct)
Refit: Windex antenna mount (Catalina Direct)
Refit: VHF Masthead antenna
Refit: Sail Track Slide system (Catalina Direct)
Refit: Halyard restrainer (Catalina Direct) (Catalina Direct)
Refit: Upper shroud tang set + Fastener Kit (Catalina Direct)
Refit: Lower shroud tang set + Fastener Kit (Catalina Direct)
Refit: Lower shroud Chainplate Upgrade Kit (Catalina Direct)
Refit: Mast Bracket Gooseneck +Fastener Kit (Catalina Direct)
Refit: Boom Internal outhaul (Catalina Direct)
Refit: Reef blocks on boom track (x2)
Refit: Cheek block single (Boom) (x2) (Catalina Direct)
Refit: Boom End tang (Catalina Direct)
Refit: Garhauer blocks at base of mast (x2)
Refit: Lazy Jack Kit
Refit: Bamar rigid vang: Model 100
Refit: custom bracket on mast and boom for vang.
Refit: Bamar Jib furler
Refit: 6” aluminum cleats on starboard and port of mast
Refit: Shrouds: Upper and lower
Running Rigging all replaced
Refit: Stays: Forestay and backstay (back bridle is original)
Refit: Anchor light
Refit: Steaming and deck light
Refit: Radar reflector tube
Refit: Forespar Mast Mount Pole chock for whisker pole
Refit: Spreader Flag Halyard Kit (Sherman Johnson) 

Miscellaneous Items
Refit: Caframo Pali engine heater for engine compartment
Refit: Caframo Pali engine heater for forward through hull compartment
Refit: Caframo True North cabin heater (used for cabin and engine)
Refit: Toolbox with parts (Filters etc)
Refit: Toolbox with rigging parts
Refit: Post aft compartment - Mesh bags for: Cloths/ sponges/ brushes/ foldable buckets
Mast Mate Webbing ladder mast climber

Plumbing/Water System
Refit: All plumbing hoses (freshwater and wastewater ) replaced
Refit: wastewater tank
Forward and starboard freshwater tanks
Refit: Custom stainless steel adjustable brackets to hold freshwater and wastewater tanks in position
Refit: Eemax marine application instantaneous water heater
Refit: Bilge Pump (Johnson Ultima)
Refit: Bilge alarm (Rule High Water Bilge Alarm)
Refit: Manual Bilge pump in Port locker ( Whale Gusher with cockpit cover)
Refit: Jabsco automatic water system pump
Refit: Custom oak coated in epoxy back boards for all through hulls
Refit: Forespar Marelon seacocks and pipe fittings
Refit: Jabsco macerator pump
Refit: Intake water filter for engine (Catalina Direct)
Refit: Traps on galley and head basins
Refit: Marelon vented lops installed where required
Refit: Shureflo Accumulator tank

Propeller/Shaft

Shaft Coupler for Universal Diesel – I” diameter shaft (Catalina Direct)
Coupler fastener kit Catalina Direct)
Prop Shaft (Catalina Direct)
Cutlass bearing (Catalina Direct)
Stuffing Box for 1” shaft (Catalina Direct)
Prop Shaft Castle Nut (Catalina Direct)
Stuffing Box Hose and clamps
Three bladed propeller (Catalina Direct)

Safety
Refit: Inflatable PFD with harnesses – manual+ automatic backup inflation with harness (Mustang MD 2017) (x2)
Refit: Inflatable PFD – manual+ automatic backup inflation (Mustang MD3053) (x2)
Refit: Type2 life vests in storage bag (x4)
Refit: Fire extinguisher in Cockpit locker
Refit: Life Sling 2 in Rail mount bag
Refit: Standard safety Tether                                                           
Refit: Jackline (x1)
Refit: Throw bag
Refit: Davis LED Megalight (12V Lighter plug – use at might below boom while moored)

Sails
Refit: Catalina 30 cruising spinnaker – 10 radial panels 589 sq ft (Ullman Sails from
Catalina Direct) + sail bag (sail has never been used)
Refit: Spinnaker sleeve (never been used)
Refit: Spinnaker Tacker with ratchet block (never been used)
Refit: Jib 110%  with pacific blue sun cover on foot and leech (Ullman Sails from Catalina Direct) + sail bag (Sail little used)
Refit:  Main sail with full batten and additional reef point (Ullman Sails from Catalina Direct) + sail bag (Sail little used)

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

PLEASE CONTACT SHAYNE ELLIOT - KELOWNA YACHT SALES - 1-833-UCYACHT EXT 3002